The light bars installed indoors will not be exposed to the sun and rain, and the installation method is very simple. First of all, there is a double-sided tape on the back of the light bar. This double-sided tape is sticky enough to cope with the indoor environment. Tear off the sticker and fix the light bar to the position where it needs to be installed. Then connect the power cord of the light bar to the indoor power supply, and install the control switch. If multiple light bars are to be connected together indoors, pay attention to controlling the connection distance of the light bars. Because the light bar easily heats up during work, too high heat will affect the service life. Therefore, the connection distance of the light bar should be kept within 15 meters.
