How To Choose LED Wall Washer?
At present, Outdoor led wall washers are generally used in the lighting projects of bridges and many palace . and we tell us how to choose the led wall washer, The led wall washer conventional led wall washer is composed of five parts. Light board, shell, wire, glue and lens. The following Xiao Ai will tell you what are the five parts that make up the LED wall washer.
Outdoor led wall washer
First: led wall washer lamp board: the lamp board is composed of an aluminum substrate, lamp beads and resistors, and three parts constitute a pasted semi-finished lamp board. The thickness of the aluminum substrate and the high thermal conductivity material are good for the heat dissipation of the lamp beads. The light source adopts OSRAM 3030 SMD lamp beads.
Second: LED wall washer shell: The shell material is composed of high-quality 6063 stretched aluminum profile and tempered glass. The greater the power of our conventional wall washer, the greater the thickness and size of the shell, so that the better the heat dissipation.
Third: led wall washer wire: all lamps and lanterns, whether wall washer or led line light are on, need to be connected to the wire. The wire used for our conventional wall washer includes a waterproof docking plug and the back wire connected to the inner light board. For the plug, the national standard one square cold-proof aviation quick plug is generally used. The back line adopts the national standard 0.75 square. It thickens the power circuit of the lamp board, so that the number of lamps in series is more. Installing the above is simpler and more convenient!
Fourth: led wall washer glue: because the lamp needs to be waterproof and used outdoors, the inside of the lamp will be sealed with glue. Reach IP65 or higher for waterproof lamps. Conventional silica gel generally uses two kinds of silica gel or PU glue.
Fivth: led wall washer lens; there are many degrees of lens, ranging from 5 degrees to 120 degrees, the smaller the degree, the narrower the wall illuminated by the light, and the higher the height. Generally, the conventional wall washer lamps in the market are It uses between 30 degrees and 60 degrees, and there are also very narrow beams that use small power lenses.
