WS2811 12V Addressable RGB LED Strip Lights
WS2811 strip is low power consumption, Super-bright but running with low temperature.
And 3pcs 5050 RGB SMD with one WS2811 IC Chip realize Addressable, 3LED per cell is programmable, with 8 bits of red, green, and blue data shifted in for 24 bit color, Strips take data in green, red, blue order. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.
Specifications
LED Chip | SMD5050 RGB LED chip |
IC Chip | WS2811 IC |
LED Quantity | 30LEDs/m |
Input Voltage | DC12V |
Watts | 7.2W/M |
IP Rate | IP20(non-waterproof), IP65(Silicon-tube waterproof) ,ip68 |
PCB Color | White PCB, Black PCB |
View Angle | 120° |
Standard Reel Length | 5meter/roll, also can be customized |
PCB Width | 10mm |
Operating Temperature | -20 ~ +40°C |
Storage Temperature | -40 ~ +80°C |
Color | Addressable full color |
Parameter
Light source: 5050 RGB LED; 60 LEDs per meter; 300 LEDs per roll
IC Model: WS2811 IC; 20pcs per meter; 100pcs per roll
RGB order:BRG
Color Display: 24-bit full color
Working voltage: 12V
Working Power: 6A max @12V DC ; 72W per roll
Port scanning frequency reaches to 2KHz/s
Data transmitting speed is up to 800Kbps
Waterproof: IP65 Waterproof
Dimension: (L) 5000mm*(W)10mm* (T)3mm
Dimension:
Application:
· City skyline lighting villas advertising wall signs Christmas ( , , decorative landscape)
· Irregular design of body decoration (shopping malls, hotels, nightclubs, polygonal wall KTV
· Establishments ceiling cavity design)
· Public lighting lighting (schools, libraries, hospitals, airports, subway stations, railway stations)
· Furniture dark groove trim (door, bar, wine cabinet, wardrobe, TV cabinets, etc.)
· Automotive beauty (body, underbody, wheelbarrow balanced car, etc.)
Notes:
· Using 12VDC power supply. Higher than 12V will destroy it.
If you need more data of WS2811 led strip, we will send it to you.
The LEDs at the far end of the strip might be dimmer because of the added resistance and voltage drop that occurs during the current flows to that end of the strip. The solution is adding DC12V voltage every 16.4ft or 32ft according to the actual situation .
LED strip is made by 50cm FPCB, so there is a solder point each 50cm(1.6FT) on strip. But this minor flaw has no any bad effect on the strip's performance. In fact, ALL the LED strips on the market are manufactured in half-meter lengths.
Hot Tags: ws2811 addressable led strip light, China ws2811 addressable led strip light suppliers, manufacturers, factory, WS2813, LED Strip 95 Cri, Adapter LED Strip, Waterproof LED Strip, Programmable LED Light Controller, LED Power Supply
